MINISOFT LICENSE AGREEMENT effective September 3rd 2010
READ CAREFULLY BEFORE INSTALLING THE MINISOFT SOFTWARE APPLICATION:
CUSTOMER: THE MINISOFT SOFTWARE APPLICATION ("PRODUCT") THAT YOU PURCHASED CONTAINS COPYRIGHTS, TRADE
SECRETS, TRADE MARKS, AND OTHER INTELLECTUAL PROPERTY RIGHTS BELONGING TO MINISOFT, INC. ("MINISOFT"), HAVING ITS PRINCIPAL
OFFICES LOCATED AT 1024 FIRST STREET, SNOHOMISH, WASHINGTON, 98290, U.S.A. THE PRODUCT MAY BE INSTALLED, COPIED, DISPLAYED,
EXECUTED, PERFORMED, OR USED IN ANY OTHER FASHION ONLY IN ACCORDANCE WITH THE TERMS OF THIS LICENSE AGREEMENT ("AGREEMENT"
OR "LICENSE"). THE TERMS "YOU" OR "YOURS" ARE SOMETIMES USED HEREIN AND MEAN RESPECTIVELY CUSTOMER OR CUSTOMER'S.
SOMETIMES EACH OF MINISOFT AND CUSTOMER IS REFERRED TO HEREIN AS A "PARTY," AND SOMETIMES THEY ARE
COLLECTIVELY REFERRED TO AS THE "PARTIES."
YOU MAY NOT INSTALL, COPY, DISPLAY, EXECUTE, PERFORM OR USE IN ANY OTHER FASHION THE PRODUCT EXCEPT IN
ACCORDANCE WITH THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU INSTALL, COPY, DISPLAY, EXECUTE, PERFORM OR OTHERWISE USE
ANY PART OF THE PRODUCT, YOU ARE DEEMED TO HAVE ACCEPTED AND YOU ARE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS MINISOFT
LICENSE AGREEMENT ("AGREEMENT"). IN ORDER TO USE THE PRODUCT, YOU MAY BE REQUIRED TO OBTAIN A UNIQUE CODE OR CODES FROM
MINISOFT TO ENABLE INSTALLATION, COPYING, DISPLAY, EXECUTION, PERFORMANCE AND OTHER USE OF THE SOFTWARE PRODUCT.
IF YOU DO NOT ACCEPT AND AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, YOU ARE PROHIBITED FROM
INSTALLING, COPYING, DISPLAYING, EXECUTING, PERFORMING, OR USING IN ANY OTHER FASHION THE PRODUCT. VIOLATION OF THIS
AGREEMENT (1) CONSTITUTES INFRINGEMENT, MISAPPROPRIATION AND CONVERSION OF MINISOFT'S COPYRIGHTS, TRADE SECRETS, AND OTHER
INTELLECTUAL PROPERTY RIGHTS, (2) WILL SUBJECT THE INFRINGER TO SIGNIFICANT CIVIL LIABILITIES FOR DAMAGES (INCLUDING WITHOUT
LIMITATION STATUTORY DAMAGES) AND OTHER REMEDIES AND LIABILITIES, AND (3) MAY CONSTITUTE VIOLATION OF CRIMINAL LAWS.
IF A CUSTOMER IS PURCHASING AN UPGRADE FOR AN EARLIER VERSION OF THE PRODUCT, THEN THIS AGREEMENT SHALL
SUPERSEDE THE TERMS AND CONDITIONS OF THE LICENSE AGREEMENT THAT APPLIED TO THE EARLIER VERSION AS TO THE USE OF THE UPGRADE
PRODUCT AS OF THE DATE OF INSTALLATION OF THE UPGRADE.
NOW, THEREFORE, in consideration of the foregoing provisions and the terms and
conditions herein contained and for other good and valuable consideration, the receipt and sufficiency of which are hereby
acknowledged, the following terms and conditions apply:
A. License Grants
1. Upon MINISOFT's receipt from the Customer of the one-time license fee and further subject to the other
terms and conditions herein, MINISOFT grants the Customer a non-exclusive and non-transferable perpetual license: (a) to
install and use the Product on only one host computer or business server in the Customer's business organization; and (b) to
install the client portion of the Product on a network server for access by more than one personal computer and on any
personal computer client accessing the host server program.
2. You may not: (a) allow access to or use of the Product to anyone outside of your organization; (b)
decompile, reverse engineer, decrypt, disassemble, or otherwise attempt to copy or replicate the source code; (c) modify or
translate those portions of the Product that are provided in an object or source code form, or alter, merge, modify, reverse
engineer or adapt the Product in any way including disassembling or decompiling; (d) copy, loan, rent, lease or sublicense,
assign, convey, sell, mortgage, pledge, dispose or in any other manner transfer to a third-party any part of or all of the
Customer's rights and obligations under this Agreement or in the Product; or (e) otherwise copy, distribute, rent, loan,
disseminate, publish, sell or transfer any portion of the Product in any way inconsistent with or contrary to the terms and
conditions of the Agreement.
3. Any attempt to violate any prohibitions described in this Agreement shall be considered a material breach
of this Agreement, and no attempt to violate section 2(c) or 2(d) in the immediately preceding paragraph shall have any
effect, and any prohibited act described therein shall be void and of effect if made by the Customer.
4. You may make one copy of the Product for use as a backup copy (the "Copy") provided that: (i) the Copy
includes all notices of copyright and all other proprietary rights appearing in and on the Software Product; (ii) the Copy
and the original Product are not in use at the SAME time; (iii) Customer establishes a procedure for accounting for the Copy
at all times; and (iv) Customer destroys or returns to MINISOFT the Copy when it is no longer required or when the license
grants made hereunder are terminated for any reason, whichever occurs first.
5. This Agreement grants to the Customer a license for use of the Product on the terms and conditions set
forth in this Agreement; and (ii) the Customer may not install, copy, perform, execute, display, or use in any other fashion
the Product except in accordance with the terms and conditions of this Agreement. By any use of any element of the Product,
the Customer shall be deemed to have accepted and be bound by all the terms and conditions of this Agreement.
6. MINISOFT retains and reserves all rights to the Product. Nothing contained herein shall be deemed to
convey to the Customer any title to, or an ownership interest in, the Product or any of the intellectual property rights
contained in the Product. Upon termination of this Agreement, all rights granted to the Customer herein shall automatically
revert to MINISOFT.
The license grants made hereunder shall automatically terminate on the date of any breach by the Customer of
any of the terms and conditions of this Agreement. In any such termination, you shall discontinue using the Product. You
further agree to return the Product to MINISOFT or destroy all components of the Product and to certify in writing that the
Product is no longer in use and that you have kept no copies of the Product. In any such termination of the license grants,
none of MINISOFT's rights in law or equity shall be barred, discharged, released, or otherwise impaired by such termination,
and MINISOFT reserves all such rights described herein.
C. Confidential Information
The Product also contains MINISOFT's commercially valuable, proprietary and confidential information and
trade secrets (collectively "Confidential Information"). You are obligated to preserve and hold in confidence any
Confidential Information and may not use any of it except in accordance with the terms and conditions of this Agreement.
Confidential Information shall not include what is already public at the date of its disclosure or what later becomes
lawfully public through no fault or responsibility of the Customer.
D. Limited Warranties and Limitations on Damages and Remedies.
1. Only the limited warranties expressly described in this section are made to the Customer purchasing this
Product. No warranty of any kind, whether express or implied, is made to any third-party or other transferee or successor of
2. MINISOFT warrants that it has the right to grant the licenses contained in this Agreement.
3. MINISOFT warrants that this product will execute its programming instructions when properly installed on
a properly configured computer for which it is intended. MINISOFT makes no warranty of any kind, implied or express, that
the Product will meet Customer's requirements or that the Product will be uninterrupted or error-free
4. MINISOFT, Inc. warrants the media upon which this Product is recorded to be free from defects in
materials and workmanship under normal use for a period of 90 days from the date of purchase. During the warranty period
MINISOFT will replace media that prove to be defective. Customer's exclusive remedy for any media that proves to be
defective shall be to return the media to MINISOFT for replacement.
5. MINISOFT' only obligation, liability and/or remedy, with respect to the warranties set forth in this
Agreement shall be one of the following, which MINISOFT shall have sole discretion to choose: (1) as described above, to
provide replacement media (whether in the form of the current release or otherwise) for the Product; (2) to replace, without
charge, the Product with a functionally equivalent software product; or (3) to refund the applicable license fees paid to
MINISOFT by Customer. These are the sole and exclusive remedies for any breach of warranty.
6. MINISOFT shall have no obligation, liability or any other kind of responsibility for the costs of
restoring any destroyed or defective data, installation of replacement media, or software conversion work made necessary by
replacement media, even if MINISOFT had been specifically informed by Customer of the possibility or probability of any such
consequences. During the ninety (90) days warranty period for the media, MINISOFT will replace, without charge, on an
exchange basis, any media which is not as warranted. Customer must return the defective item postpaid to MINISOFT,
postmarked within the time period stated above. Customer must either insure the defective item being returned or assume the
risk of loss or damage in transit. Any claim under the above warranty must include a copy of Customer's receipt or invoice
or other proof of the date of delivery.
7. Year 2000 Warranty. MINISOFT warrants that the Product will accurately process date/time data (including,
but not limited to, calculating, comparing, and sequencing) from, into, and between the twentieth and twenty-first
centuries, and the years 1999 and 2000 and leap year calculations, in accordance with the Product's documentation BUT ONLY
to the extent that other technology and systems (e.g., software and operating systems, hardware and firmware) used in
combination with the Product properly exchanges date/time data with it. In addition to the limitations of liability and
remedies described above in this Section, the Year 2000 warranty made herein is made only for ninety (90) days after the
date of delivery of the Product and only if any noncompliance is discovered and made known to MINISOFT in writing within
such ninety (90) days. The Year 2000 warranty expires after such ninety (90) day period and shall not extend to any events
occurring after the expiration date.
8. MINISOFT makes no other warranty, expressed or implied, with respect to the Product.
9. NOTICE: THE WARRANTIES, OBLIGATIONS AND LIABILITY OF MINISOFT AND THE RIGHTS AND REMEDIES OF CUSTOMER
SPECIFICALLY SET FORTH IN THIS AGREEMENT ARE THE CUSTOMER'S EXCLUSIVE REMEDIES. MINISOFT DISCLAIMS, AND CUSTOMER HEREBY
WAIVES, DISCHARGES AND RELEASES MINISOFT, ITS OFFICERS, DIRECTORS, EMPLOYEES AND AGENTS, FROM ANY AND ALL (1) OTHER
WARRANTIES, OBLIGATIONS, OR LIABILITIES AND (2) RIGHTS, CLAIMS, CAUSES OF ACTIONS, EXPRESS OR IMPLIED, ARISING BY LAW OR
OTHERWISE IN CONNECTION WITH, REGARDING, OR ARISING FROM THE PRODUCT OR ANY RELATED SOFTWARE, TANGIBLE OR INTANGIBLE ITEMS
OR SERVICES PROVIDED UNDER THE AGREEMENT (INCLUDING, WITHOUT LIMITATION, ALL DOCUMENTATION SUPPLIED WITH THE PRODUCT). THE
WAIVER, DISCHARGE AND RELEASE INCLUDE, BUT ARE NOT LIMITED TO: (1) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
SPECIFIC PURPOSE; (2) ANY IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE; AND (3)
ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY, WHETHER IN TORT, CONTRACT, OR OTHERWISE. IN NO CASE SHALL MINISOFT BE
LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF USE, REVENUE,
PROFIT, OR DATA), PUNITIVE DAMAGES, EXEMPLARY OR OTHER STATUTORY DAMAGES, EXPENSES, COSTS (INCLUDING ATTORNEY FEES). IN
ADDITION, IN NO CASE SHALL MINISOFT'S LIABILITY EXCEED THE FEES PAID BY CUSTOMER FOR THE PRODUCT.
Customer is entitled to updates and enhancements to licensed software if under a current Minisoft software
update and subscription service. The cost of the update and subscription service will be 20% of the purchase price of the
licensed software. The update and subscription service is for twelve (12) months and can be renewed at the customer’s
F. Support Services
A customer that has purchased annual support entitles them to any and all software updates for their
licensed product(s) as well as technical support via phone and email. Software Updates are available from our web site,
www.minisoft.com. Included with the
purchase of support is the use of our Toll Free 800 number, and support email. Days and Hours of support coverage are Monday
through Friday 7:30am (Pacific) until 5:00pm (Pacific). When support is purchased or renewed, an update may be downloaded
from the Minisoft Website. In cases where support has expired, back-support is charged to bring the support account current.
Any supplemental software code provided to you as part of the Support Services shall be considered part of the SOFTWARE
PRODUCT and subject to the terms and conditions of this License Agreement.
1. Governing Law. This Agreement is made for the sole benefit of the parties hereto, and there are no third
party beneficiaries to this Agreement. This Agreement shall be interpreted under the laws of the State of Washington,
notwithstanding the application of any jurisdiction's choice-of-law rules to the contrary.
2. Independent Contractors. No agency, partnership, joint venture, or employer-employee relationship is
created hereby, and neither party nor any of its agents or employees shall have any authority of any kind to bind the other
party in any respect whatsoever. Each party is an independent contractor to the other party.
3. No Assignment by Customer. This Agreement shall be binding upon and insure to the benefit of MINISOFT and
any successors and assigns. Customer shall have no right to assign or otherwise transfer its rights or obligations under
this Agreement except with the prior written consent of MINISOFT, which MINISOFT in its sole discretion and for any reason
or no reason provide or withhold.
4. Entire Agreement. This Agreement contains the complete understanding between the parties and shall as of
the date the Product is first installed supersede all other agreements, whether they are written or oral, between the
parties concerning the particular subject matter. The language of this Agreement shall for all purposes be construed as a
whole, according to its fair meaning, not strictly for or against either party, and without regard to the identity or status
of any person who drafted all or any part of it. No purchase order or any other purchasing instruments issued by Customer,
even if such purchase order or other purchasing instrument provides that it takes precedence over any other agreement
between the parties, shall be effective to contradict, modify, delete from or add to the terms of this agreement in any
5. Severability. In the event that any one or more provisions of this Agreement is found by a court of
competent jurisdiction to be unenforceable or invalid, then notwithstanding any such finding the remainder of this Agreement
shall remain in full force and effect, and such provision that is found to be unenforceable or invalid shall be deemed
6. Waiver. Neither party's right to require performance of the other party's obligations hereunder shall be
affected by any previous waiver, forbearance, or course of dealing, nor shall any waiver or forbearance or other course of
dealing at any time with respect to any term or condition in this Agreement be effective unless evidenced in writing signed
by the waiving party as to such waiver, forbearance or other course of dealing. No waiver or modification of this Agreement
or any covenant, condition or limitation herein contained shall be valid and no evidence of waiver or modification shall be
offered or received in evidence in any proceeding, arbitration or litigation between the parties hereto arising out of or
affecting this Agreement or the rights or obligations of the parties hereunder, unless such waiver or modification is in
writing duly signed by both parties.
7. Headings, Sections - The various headings in this Agreement are inserted for convenience only and shall
not affect the meaning or interpretation of this Agreement or any Section or provision hereof.
8. Disputes; jurisdiction and venue. Customer and MINISOFT consent to personal jurisdiction, subject matter
jurisdiction, and venue in the state and/or federal courts sitting in King or Snohomish Counties, State of Washington. Any
action relating to this Agreement must be brought in the state or federal courts located in King or Snohomish County,
9. Attorney's Fees. In the event legal action is brought by either party to enforce any of the provisions of
this Agreement, the prevailing party shall recover its reasonable attorney's fees, costs, and expenses, including but not
limited to fees, costs and expenses of collecting any judgment.
10. Export. The export of this product is restricted by U.S. export regulations.
11. GOVERNMENT RESTRICTED RIGHTS. The Software Product and documentation are provided with restricted
rights. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (2)
(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252. 227-7013 or subparagraphs (c) (1) and (2) of
the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable. Contractor/manufacturer is MINISOFT,
INC., 1024 FIRST STREET, SNOHOMISH, WASHINGTON, 98290, U.S.A